
Carbon fiber cloth is graded by areal weight. The two workhorse grades are 200 g/m² and 300 g/m². Neither is "better" — each fits different jobs.
Key Differences
| Item | 200 g/m² | 300 g/m² |
|---|---|---|
| Design thickness | ~0.111 mm | ~0.167 mm |
| Capacity per ply | Lower | ~1.5× of 200 g |
| Wet-out | Easy | Needs thorough rolling |
| Conforming to shapes | Very good | Stiffer; round corners first |
How to Choose
- By ply count — 300 g reaches the same capacity with fewer plies, saving time and reducing interlaminar defects.
- By geometry — elbows, tees, small pipes and sharp concrete corners favour 200 g.
- By site conditions — in cold weather with viscous resin, 200 g wets out more reliably.
Often Overlooked
Design uses the cloth's design thickness, not the measured thickness of the cured laminate. Resin makes the measured value much larger — never back-calculate strength from a caliper reading.